DWART INDUSTRIES

How Our 3D Printing Service Works

Dwart Industries is an online 3D printing service delivering parts across India. Upload your design, choose from FDM and SLA printing in 18 engineering materials, and get an instant quote, whether you need a single prototype or a production batch.

An engineer checks every file before it prints, and every part is inspected before it ships. Choose free image review at checkout and you approve your part from photos before it leaves us.

Get Quote See the process
  • 1–5 daysFDM production
  • 1–3 daysSLA production
  • 2–8 daysDelivery after dispatch
  • 2 minChat response, Mon – Sat

Small orders are typically dispatched within 48 hours. Working days, Monday to Saturday, counted from order confirmation and including the engineering review. Large orders can take 1–3 extra days. The checkout page shows the exact production and delivery estimate for your order.

Three Ways to Order

Pick the route that matches your part count and how critical the parts are.

  • Instant price

    Single part

    For one or a few parts

    • Upload one file
    • Choose material, colour and quantity
    • See the price instantly and pay online
    Instant quote for
    FDM SLA
  • Instant price

    Bulk upload

    For up to 30 different parts

    • Upload many files at once
    • Set material and quantity per part
    • One price and one checkout for the batch
    Bulk upload for
    FDM SLA
  • Engineer quote

    Assembly and critical parts

    For 30+ parts, full STEP assemblies, tight tolerances or load-bearing parts

    • Upload one STEP assembly; every component is detected automatically
    • An engineer reviews it and sends a formal quote within one working day
    • Pay through a secure link, no account needed
    Choose FDM or SLA in the form
    Upload Assembly

Every route follows the steps below. For assembly orders, the engineering review happens before you pay, as part of the quote.

Your Order, Step by Step

Five steps, and what happens at each decision point along the way.

  1. Upload, quote and pay

    Upload your STL, OBJ, STEP or IGES file, choose from 18 materials across FDM and SLA, and see your price straight away. The checkout page shows the exact production and delivery estimate for your order, and production starts once payment is confirmed.

    • FDM parts up to 300 × 300 × 300 mm
    • SLA parts up to 210 × 118 × 220 mm
    • Tolerance ±0.1 mm per 100 mm on FDM, ±0.15 mm on SLA
    • Minimum order ₹499, with free shipping above ₹999
    Upload 3D model for an instant quote

  2. Engineering review before printing

    A mechanical engineer reviews your file from 9 AM on the next working day, checking it against real manufacturing limits for your chosen process and material.

    • Wall thickness, overhangs and unsupported spans
    • Trapped volumes and drainage on hollow parts
    • Holes, threads, text and other fine features
    • Mesh errors that would fail during slicing

    If your chosen material doesn't suit how the part will be used, the engineer suggests a better one before printing. We then set orientation, supports and print settings, so you only choose the geometry and material.

    Engineering review of a 3D model before printing
  3. Does the file pass review?
    YES
    The file is cleared and goes to scheduling.
    NO
    We contact you before anything prints, explain the issue and suggest a fix. You can approve the part as it is, and our reprint policy still applies. If you send a revised file, the original item is refunded and the amount is credited to a new order for the revised file. If the new price is higher, you pay the balance through a payment link; if it is lower, we refund the difference.↺ Back to review

  4. Two queues, scheduled by print time and material

    Every order goes into one of two production queues, so quick prototypes and production runs never hold each other up.

    Quick prototypes
    One-off parts and small orders, scheduled across the fleet for the fastest turnaround.
    Bulk and repeat orders
    Dedicated machines and their own queue, running the settings locked for your part.

    Within each queue, short jobs run during working hours, when a failed first layer is caught within minutes. Long jobs run overnight, so a long print never holds up a short one.

    9 AM – 5 PMUnder 5 hours
    5 PM – 11 PM5 to 10 hours
    OvernightOver 10 hours

    Jobs also go to machines already loaded with your material. Fewer filament changes means less waste and less risk of contamination from the previous material. Scheduling always works around your confirmed delivery date.

    PLA PETG ABS ASA TPU 95A PC PA6-CF PA12-CF Standard Resin Tough Resin All 18 materials
    Flexible TPU 95A parts printed on the FDM fleet
  5. Does the print complete successfully?
    YES
    The part moves to quality control.
    NO
    We re-run it at our cost and tell you straight away if it affects your delivery date.↺ Re-run

  6. Quality control

    Supports are removed and every part is inspected against your order before packing.

    • Visual check of every part for warping, defects and support marks
    • Fit features and critical dimensions measured with calipers
    • Material, colour and quantity match the order
    TPU parts after support removal and inspection
  7. Did you choose image review at checkout? (free, optional)
    YES
    We photograph your part and upload the images to your order page. You approve it or flag a concern. Your part stays with us until you approve it, or until we rework it from your feedback.↺ Rework if flagged
    NO
    The part goes straight to dispatch after quality control.
    PA12-CF part as shown in an approval photo
    ApproveFlag a concern

  8. Dispatch and delivery

    Parts ship across India via Blue Dart, Delhivery or DTDC, typically arriving 2–8 days after dispatch.

    • Packed to prevent movement and surface damage in transit
    • Assembly orders are bagged and labelled by CAD part name
    • Tracking link emailed as soon as your order is dispatched

    If something arrives damaged or doesn't fit, raise a ticket from your account. Photos are enough to start, so there's no need to send the part back first. See our refund and returns policy for how cases are resolved.

    3D printed parts packed and delivered across India

Behind Every Print

Engineering-grade materials only print well when the setup is right. These are the things we don't skip.

Daily calibrationEvery machine runs a 10-minute calibration print each day before production starts.
Dried filamentNylon and carbon-fibre grades are dried before printing, since absorbed moisture weakens the part.
Hardened nozzlesCarbon-fibre materials run on 0.4 and 0.6 mm hardened steel nozzles that hold dimensional accuracy.
Enclosed machinesEngineering grades print in heated, enclosed chambers to control warping.
Repeatable productionSettings are tuned for each material, then locked once a part is approved. Repeat orders run on dedicated machines, so your 50th batch matches the first.
Proven at volume13,415+ parts manufactured and 17,800+ machine hours logged for clients across India.

Ordering for a Business?

From one-off prototypes to repeat production runs, business orders get the same process above, plus support built for procurement.

B2B Support FDM Bulk Upload SLA Bulk Upload
  • GST tax invoice on every order, with input tax credit
  • Business pricing: a discount for GST-registered buyers above ₹4,999, and volume pricing above ₹9,999 and for repeat orders
  • PO-based orders, with credit terms for approved repeat customers
  • Accounts contact gets the payment link and order updates directly
  • QC inspection report available with your order
  • Mutual NDA, signed digitally before you share files
  • Secure file exchange: we can connect to your SFTP or vendor portal from a dedicated static IP that your IT team can whitelist
  • Direct line to the engineer who reviews and prints your parts

Your files stay yours

  • Used only to produce your order
  • Never shared with third parties
  • Deleted on request

A registered business

Dwart Industries LLP, incorporated 2023 and based in Kerala. GST-registered and Udyam-registered MSME, with secure payment through Razorpay.

If something goes wrong

2 minutes

Response time on WhatsApp and web chat, 9 AM – 7 PM. Call support runs 9 AM – 5 PM, Monday to Saturday. You can also raise a ticket from your account.

Frequently Asked Questions

How long does 3D printing take at Dwart Industries?

Small orders are typically dispatched within 48 hours. FDM production takes 1 to 5 working days and SLA 1 to 3 working days, counted from order confirmation and including the engineering review. Large orders can take 1 to 3 extra days. Delivery across India typically takes 2 to 8 days after dispatch. The checkout page shows the exact production and delivery estimate for your order.

Does Dwart Industries review my design before printing?

Yes. A mechanical engineer reviews every file from 9 AM on the next working day, checking wall thickness, overhangs, trapped volumes, fine features and mesh errors. Our team then sets orientation, supports and print settings.

What happens if my file has a problem?

We contact you before anything prints, explain the issue and suggest a fix. You can approve the part as it is, and our reprint policy still applies. If you send a revised file instead, the original item is refunded and the amount is credited to a new order for the revised file. If the new price is higher, you pay the balance through a payment link; if it is lower, we refund the difference.

Can I see my part before it ships?

Yes. Image review is free and optional at checkout. We photograph the finished part and upload the images to your order page. Your part stays with us until you approve it, or until we rework it based on your feedback.

What happens if a print fails?

If a print fails on our side, we re-run it at our cost and tell you straight away if it affects your delivery date.

What tolerance can I expect?

FDM parts typically hold ±0.1 mm per 100 mm, and SLA parts ±0.15 mm. Fit features and critical dimensions are measured with calipers during quality control.

How do I order many parts or a full assembly?

For up to 30 different parts, use bulk upload for an instant price and a single checkout. For more than 30 parts, a full STEP assembly, or critical and load-bearing parts, upload the assembly and an engineer sends a formal quote within one working day, payable through a secure link. Bulk and repeat orders run in their own queue on dedicated machines, separate from quick prototypes.

Does Dwart Industries support business and bulk orders?

Yes. Every order includes a GST tax invoice. GST-registered businesses get a discount on orders above ₹4,999, and volume or repeat orders above ₹9,999 receive a custom quotation, usually within one working day. Bulk upload is available for both FDM and SLA.

How quickly does Dwart Industries respond to support requests?

Within 2 minutes on WhatsApp and web chat between 9 AM and 7 PM, Monday to Saturday. Phone support is available from 9 AM to 5 PM, Monday to Saturday.

Are my CAD files kept confidential?

Yes. Files are used only to produce your order, are never shared with third parties, and are deleted on request. For business work we sign a mutual NDA digitally, and we can exchange files through your SFTP or vendor portal from a static IP that your IT team can whitelist.

Ready to Get Started?

Upload your file, choose your material, and see your price and exact production and delivery estimate before you commit.

FDM Instant Quote SLA Instant Quote